sv en

Tool Cases: e.s. Socket wrench set pro 1/4+3/8+1/2 in Boxx102

e.s. Socket wrench set pro 1/4+3/8+1/2 in Boxx102

prices inc VAT

3 623,75 SEK

( inc VAT | ex VAT )

from 3 sets: 3 561,25

from 6 sets: 3 498,75

Catalogue No.: 5508400

Delivery time approx. 4-6 working

days

Product description
Find alternatives

Content 6.3 mm (1/4"): e.s. Ratchet wrench "pro" 6.3 mm (1/4") / e.s. Sliding handle 6.3 mm (1/4") / e.s. Extension 6.3 mm (1/4") 50 und 100 mm / e.s. Cardan joint 6.3 mm (1/4") / e.s. Socket wrench inserts 6.3 mm (1/4"): 4 - 4,5 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm / e.s. Bit adapter 6.3 mm (1/4") / e.s. Adapter for drill 6.3 mm (1/4") / e.s. Handle insert 6.3 mm (1/4")

Content 10.0 mm (3/8"): e.s. Ratchet wrench "pro" 10.0 mm (3/8") / e.s. Sliding head adapter 10.0 mm (3/8") / e.s. Extension 10.0 mm (3/8") 125 mm / e.s. Cardan joint 10.0 mm (3/8") / e.s. Socket wrench inserts 10.0 mm (3/8"): 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 mm / e.s. Reduction adapter 10.0 mm (3/8") to 6.3 mm (1/4") / e.s. Extension adapter 10.0 mm (3/8") to 12.5 mm (1/2") / e.s. Bit adapter 10.0 mm (3/8") / e.s. Adapter for drill 10.0 mm (3/8")

Content 12.5 mm (1/2"): e.s. Ratchet wrench "pro" 12.5 mm (1/2") / e.s. Sliding head adapter 12.5 mm (1/2") / e.s. Extension 12.5 mm (1/2") 125 und 250 mm / e.s. Cardan joint 12.5 mm (1/2") / e.s. Socket wrench inserts 12.5 mm (1/2"): 10 - 13 - 17 - 19 - 22 - 24 - 27 - 30 - 32 mm / e.s. Reduction adapter 12.5 mm (1/2") to 10.0 mm (3/8") / e.s. Bit-Box Color: (PH) 1 – 2x 2 – 3 / (cross) PZ 1 – 2x 2 -3 / (slit) 3 - 4 – 5 – 6 / (outer hex SW) 3 - 4 – 5 – 6 / (TX) T10 – T15 – T20 – T25 – T27 - T30 – T40 / (TX with hole) T10 – T15 – T20 – T25 – T27 - T30 – T40 / Bit holder with quick-change chuck / Adapter outer square to hex.

e.s. Ratchet wrench pro

Lower 4° regrip angle

No space? No problem. The 4º regrip angle allows easy and time-saving use of the e.s. Ratchet wrench even in very tight spaces. Thanks to the newly developed 90-teeth mechanism, the angle compared to conventional fine-tooth wrenches is reduced by 25 %.

High torque

Releases screws when others have long since given up. Despite the fine teeth with 90 teeth, the e.s. Ratchet wrench generates an enormously high torque of up to 750 Nm. This means that it lies 50% above DIN and releases screws when others have long since given up.

Industrial quality made in Germany

Flat switch lever

Faster switching. The flat lever for setting clockwise or anticlockwise operation closes flush with the casing. This design protects against accidental switching and damage, and obstructions in tight work situations.

Secure push-button lock

Tight connection. Unintentional release of socket wrench inserts of adapter is a thing of the past. The secured socket wrench inserts can be removed at just the push of a button. The push button lock allows fast replacement even with oily hands.

Extremely stable. The square shaft made of chord-vanadium enables a high load in every situation.

Multi-component test

The completely newly developed multi-component handle is ergonomically shaped as a standard ratchet handle.

The form, which is optimally moulded to fit the hand, helps to avoid weals on the hands. Well thought-through details, like the thumb groove, and non-slip zones help support optimised force transmission without loss.

Practical suspension hook. The e.s. Lanyard (Art. 55.13.535) can be attached into the hook using the enclosed karabiner.

e.s. Lanyard

Torque test

The torque test was carried out by a neutral test institute. The test with 10 e.s. Ratchet wrench 'pro' respectively shows no deformation of limitation for a load of more than 50 % of the specified DIN values.

(I) e.s. Ratchet wrench "pro" 1/4" compared to a (II) normal 1/4" Ratchet wrench (acc. to DIN)

(I) e.s. Ratchet wrench "pro" 3/8" compared to a (II) normal 3/8" Ratchet wrench (acc. to DIN)

(I) e.s. Ratchet wrench "pro" 1/2" compared to a (II) normal 1/2" Ratchet wrench (acc. to DIN)

Lifecycle test e.s. Ratchet wrench pro

Endless work. No signs of wear were established in an extensive test comprising more than 30,000 actuations at 175 Nm.

e.s. Sliding handle

The durable e.s. Sliding handles can be used in screw situations that are unsuitable for using a ratchet.

e.s. Extension

Deeper installation positions can be reached with the e.s. Extension easily and efficiently.

e.s. Cardan joint

The e.s. Cardan joint allows you to access particularly difficult installation positions.

e.s. Socket wrench insert 1/2 hex

Surface in perfection. All e.s. socket wrench inserts are finished with a very durable nickel-chrome coating. The special coating procedure increases the resistance capability toward extternal influences significantly. This makes peeling chrome resulting from heavy loads, scratches on the surface and therefore potential rust areas a thing of the past.

The deeply milled ball grooves ensure a secure hold on the e.s. socket wrench inserts.

Thanks to the perfected "pro" profile, the force is directly ideally on the edges of the screws. This means that the e.s. socket wrench insert can get a grip even on worn screws and improve the force transmission.

The inner square of the e.s. socket wrench inserts is also equipped with a "pro" profile: its enlarged recesses protect the corners of the drive square and slightly curved edges apply force to the surface.

e.s. Bit adapter

Using the e.s. Bit adapter, the Wrench ratchet opens up a large number of application possibilities thanks to the use of bits.

e.s. Adapter for drill

Durable hex adapter for the use of socket wrench inserts on battery-operated screwdrivers or drills. The ball lock ensures that the attachments click securely into place.

e.s. Sliding head adapter

Thanks to the sliding handle adapter, the extension can be converted into a durable sliding handle. Ideal for screw situations where a ratchet would be unsuitable.

e.s. Reduction adapter 3/8 to 1/4

e.s. Reduction adapter 1/2 to 3/8

e.s. Enlargement adapter 3/8 to 1/2

e.s. Drive handle 1/4

If necessary, the e.s. Insert handle over a 1/4" 4-square holder allows easy and fast use of the inserts.

e.s. Bit box Color

The detachable, sturdy PE case contains 32 clearly arranged colour bits made of high-quality S2 steel (molybdenum-vanadium steel) and a bit holder with a quick change chuck and an adapter for an outer square to outer hex.

Slit bits: 3 - 4 - 5 - 6 mm
Philips bits: PH1 - 2x PH2 - PH3, PZ1 - 2x PZ2 - PZ3
Hex bits: SW3 - SW4 - SW5 - SW6
Torx bits: T10 - T15 - T20 - T25 - T27 - T30 - T40
Torx with a holeT10 - T15 - T20 - T25 - T27 - T30 - T40

Matches e.s. Boxxen System

The e.s. Boxx „102“ guarantees perfect organisation of the socket wrench sets. It can be integrated into the e.s. Boxxen System and, thanks to the easy click connection, failitates the simultaneous transport of e.s. Boxxen up to 40 kg. The modular interior can be indiviually adapted, whihc makes it highly flexible. The durable stacking box can be loaded up to 25 kg and has handles on the upper and front side. Outer dimensions (W x D x H): 367 x 316 x 72 mm

other system boxes